DSCF0128
Viewed: 440 times.
|
Next, to separate the connector halves, pull this locking tab as indicated by the red arrow.
Viewed: 465 times.
|
Tab pulled.
Viewed: 413 times.
|
You can now pull the two halves of the connector apart.
Viewed: 414 times.
|
DSCF0135
Viewed: 410 times.
|
There's a tiny plastic cover on the other side of the connector that you need to slide off to release the belt wire connector(color green). As show on the picture.
Viewed: 462 times.
|
From another angle. After sliding the tiny cover off, you can now see and access the green connector(belt buckle receptacle wire).
Viewed: 439 times.
|
You can now pull and slide out the small green connector from the big connector. This green-connector is the belt buckle receptacle wire connector).
Viewed: 424 times.
|
It appears blue in this pix, but this is the same green connector that you need to pull out.
Viewed: 428 times.
|
In this picture, I lined up the green connector to its receptacle in the main big connector(from the floor).
Viewed: 428 times.
|
Mark this for later. You have to be 100% sure of this position or you will get the seat belt warning light.
Viewed: 450 times.
|
from another angle.
Viewed: 440 times.
|
